SDP Series-
There are mainly two types of chillers are available according to requirement.
First, SDP-series chiller is an air-cooled chiller with single and double condensing panel type. This chiller is best suitable for lowering the temperature of product processing during continues mass bulk production.
This series comes with 2 TR to 30 TR capacity and temperature range of 8°c to 25°c enough to cool down your condenser, vessel jackets or product-die with much lower temperature than atmospheric temperature. Also available with temperature range of (-5 to 10°c) on special purpose chiller.
This series chiller installed with very highly efficient plate type heat-exchanger which is compact in size best suitable for SDM series.
* Compact in design
* Available with reciprocating and scroll compressor
* Optional mobility
* No installation require, Just plug and run type chiller
* Low service cost
* Plate type highly efficient evaporator
* Optional multi-circuit refrigeration
* It can be installed indoor place if enough roof height and proper air ventilated area
* Water + Glycol required for negative temperature
Second, MPM-series is a multi-purpose chiller available from medium to large size capacity. This series contain multi condenser panels and fans as per capacity requirement. This series comes with 30 TR to 200 TR capacity with wide temperature range of 5°c to 25°c. However, it required at least TWO days for commissioning, installation and balancing if chiller disassemble at factory.
* Manufactured with both scroll and screw type compressor as per client’s requirement
* Stationary type chiller
* Best suitable place is open roof as multi fans required larger air circulations better efficiency and COP
* Manufactured with/without water storage tank
* Available with more than ONE refrigeration circuit, so it can run on both circuits together during peak load as well as on single refrigeration circuit for part load
* Shell and tube type evaporator